Materials Needed:
(3) 6’x2”~12” planks of soft pine
(3) 6’x2”~4” boards
(10) 4” carriage bolts (or use at least twice as many nails
for a stationary backstop
NINJA KNIFE THROWING
Tools Required:
Saw
Drill with proper bit to make the holes for the bolts
Wrench or ratchet to insert and remove bolts (or a hammer
to pound in the nails of stationary target)
The construction of the backstop is simple and under-
standable, even from glancing at the diagram. The portable
backstop is recommended over the stationary kind as it can
be disassembled, transported and reassembled elsewhere in
minutes. As well as transporting much easier, it can be used
inside or outside.
(3) 6’x2”~4” boards
(10) 4” carriage bolts (or use at least twice as many nails
for a stationary backstop
NINJA KNIFE THROWING
Tools Required:
Saw
Drill with proper bit to make the holes for the bolts
Wrench or ratchet to insert and remove bolts (or a hammer
to pound in the nails of stationary target)
The construction of the backstop is simple and under-
standable, even from glancing at the diagram. The portable
backstop is recommended over the stationary kind as it can
be disassembled, transported and reassembled elsewhere in
minutes. As well as transporting much easier, it can be used
inside or outside.
0 Comments:
Post a Comment
<< Home